PWR/AUX Control

When buttons are positioned up and down: upper button is PWR button/lower button is AUX button.
When the buttons are positioned left and right: left button is PWR button/right button is AUX button.

Button Operation

Standby Mode

Blade is off, button light is on.

Enter Standby Mode: Hold the PWR button until you hear the prompt "Power On".

Turn On Blade: Tap the PWR button once.

Change Sound Fonts: Tap the AUX button. Repeat to cycle through the 27 default sound options. The sound library can be customized using the included SD card.

Change Blade Effects: Hold the AUX button for 1 second, then release after hearing the beep. Repeat to cycle through the options. 

Enter/Exit Volume Adjustment Mode: Hold both the PWR and AUX buttons until you hear a beep, then release.

Adjust Volume (while in Volume Mode):

• Tap the PWR  to increase the volume.
• Tap the AUX to decrease the volume.

Power Off: Tap the AUX button 3 times.

Auto Power-Saving: Saber turns off after 10 minutes of inactivity.

Lit Blade Mode

Blade is on.

Blaster Effect: Tap the AUX button.

Lock-up Effect: Hold the AUX button, then release. Tap again to deactivate.

Turn Off Blade: Tap the PWR button (returns to standby mode).

Gesture Operation

Standby Mode

When the blade is off and the button light is on.

Turn On Blade: Twist the hilt quickly in a fluid motion (clockwise then counterclockwise or vice versa).

Change Sound Fonts: Point the blade upward, hold the AUX button and twist the hilt.

Change Music: Point the blade downward, hold the AUX button and twist the hilt. Repeat to cycle through the music options (music on → off → next track → off → next track, etc.).

Lit Blade Mode

Blade is on.

Change Blade Colour: Point the blade downward, hold the AUX button and twist the hilt.

FOC (Flash on Clash): Triggered by striking the blade.

Turn Off Blade: Twist the hilt (returns to standby mode).