PWR/AUX Control

When buttons are positioned up and down: upper button is PWR button/lower button is AUX button.
When the buttons are positioned left and right: left button is PWR button/right button is AUX button.

Button Operation

Change Pixel Blade Length: While the saber is powered off, tap the PWR button 3 times to switch the blade length setting (e.g., 82cm or 92cm), adjusting how far the light travels through the blade.

 

Standby Mode

Blade is off, button light is on.

Enter Standby Mode: Hold the PWR button until you hear the prompt "Power On".

Turn On Blade: Tap the PWR button once.

Change Sound Fonts: Tap the AUX button to cycle through the 27 default sound options. The sound library can be customized using the included SD card.

Change Ignition Effects: Hold the PWR button until you hear the voice prompt for the next effect, then release. Repeat to cycle through the ignition options. 

Change Blade Effects: Hold the AUX button until you hear the voice prompt for the next effect, then release. Repeat to cycle through the options. 

Enter/Exit Volume Adjustment Mode: Hold both the PWR and AUX buttons until you hear a beep, then release.

Adjust Volume (while in Volume Mode):

• Tap the PWR  to increase the volume.
• Tap the AUX to decrease the volume.

Power Off: Tap the AUX button 3 times.

Auto Power-Saving: The saber will power off after 10 minutes of inactivity.

Lit Blade Mode

Blade is on.

Blaster Effect: Tap the AUX button.

Lock-up Effect: Hold the AUX button, then release. Tap again to deactivate.

Toggle FOC (Flash on Clash): Hold both the PWR and AUX buttons until you hear a beep, then release.

Turn Off Blade: Tap the PWR button (returns to standby mode).

Gesture Operation

Standby Mode

Blade is off, button light is on.

Turn On Blade: Twist the hilt quickly in a fluid motion (clockwise then counterclockwise or vice versa).

Change Sound Fonts: Point the blade upward, hold the AUX button and twist the hilt.

Change Music: Point the blade downward, hold the AUX button and twist the hilt. Repeat to cycle through the music options (music on → off → next track → off → next track, etc.).

Lit Blade Mode

Blade is on.

Change Blade Colour: Point the blade downward, hold the AUX button and twist the hilt.

Force Effect: Point the blade upward, hold the AUX button, and twist the hilt.

FOC (Flash on Clash): Triggered by striking the blade.

Tip Drag Effect: Hold the PWR button and hit the blade gently against another solid object (e.g. floor)

Melt Effect: Hold the AUX button and thrust the blade forward. Release to deactivate the effect.

Turn Off Blade: Twist the hilt (returns to standby mode).