Single Button Control

Button Operation

Change Pixel Blade Length: While the saber is powered off, tap the button 3 times to switch the blade length setting (e.g., 82cm or 92cm), adjusting how far the light travels through the blade.

 

Standby Mode

Blade is off, button light is on.

Enter Standby Mode: Hold until the button light turns on.

Turn On Blade: Tap the button once.

Adjust Volume: Hold until the button light flashes once, then release. Repeat to cycle through mute, low, high.

Change Ignition Effects: Hold until the button light flashes twice, then release. Repeat to cycle through the 12 default ignition options. The effects library can be customized using the included SD card.

Change Blade Effects: Hold until light flashes 3 times, then release. Repeat to cycle through the 19 default blade effect options. The effects library can be customized using the included SD card.

Change Sound Fonts: Hold until light flashes 4 times, then release. Repeat to cycle through the 27 default sound options. The sound library can be customized using the included SD card.

Power Off: Hold until the button light turns off (5 flashes).

Auto Power-Saving: The saber will turn off after 10 minutes of inactivity.

Lit Blade Mode

Blade is on.

Blaster Effect: Tap the button.

Lock-up Effect: Hold until the button light flashes once, then release. Tap the button again to deactivate.

Change Blade Colour: Hold until the button light flashes twice, then release. Repeat to cycle through the colour options. 

Toggle FOC (Flash on Clash): Hold until the button light flashes 3 times, then release. 

Turn Off Blade: Hold until the button light flashes 4 times, then release (returns to standby mode).

Gesture Operation

Standby Mode

Blade is off, button light is on.

Turn On Blade: Twist the hilt quickly in a fluid motion (clockwise then counterclockwise or vice versa).

Change Sound Fonts: Point the blade upward, hold the button and twist the hilt.

Change Music: Point the blade downward, hold the button and twist the hilt. Repeat to cycle through the music options (music on → off → next track → off → next track, etc.).

Lit Blade Mode

Blade is on.

Change Blade Colour: Point the blade downward, hold the button and twist the hilt.

Force Effect: Point the blade upward, hold the button and twist the hilt.

FOC (Flash on Clash): Triggered by striking the blade.

Tip Drag Effect: Hold the button and hit the blade gently against another solid object.

Melt Effect: Hold the button and thrust the blade forward. Release to deactivate the effect.

Turn Off Blade: Twist the hilt (returns to standby mode).