RGB S4

Standby Mode

Blade is off, button light is on.

Enter Standby Mode: Hold until the button light turns on.
Turn On Blade: Tap the button once.
Adjust Volume: Hold until the button light flashes once, then release. Repeat to cycle through mute, low, high.
Change Sound Fonts: Hold until the button light flashes twice, then release. Repeat to cycle through the 4 sound options.
Power Off: Hold until the button light turns off.
Auto Power-Saving: The saber will power off after 10 minutes of inactivity.

 

Lit Blade Mode

Blade is on.

Blaster Effect: Tap the button.
Lock-up Effect: Hold until the button light flashes once, then release. Tap again to deactivate.
Change Blade Colour:

  1. Method 1: Hold until the button light flashes twice, then release. Tap to cycle through the 12 colours. To select a colour, hold the button until the button light flashes once.
  2. Method 2: Hold until the button light flashes 3 times, then release. The saber will auto-cycle through the colours. Tap the button to select the current colour.

FOC (Flash on Clash): Triggered by striking the blade.
Turn Off Blade: Hold until the button light flashes 4 times, then release (returns to standby mode).

Sounds fonts: 

  1. Skywalker
  2. Obi
  3. Vader
  4. Anakin