Single Button Control

Button Operation

Standby Mode

Blade is off, button light is on.

Enter Standby Mode: Hold until the button light turns on.

Turn On Blade: Tap the button once.

Adjust Volume: Hold until the button light flashes once, then release. Repeat to cycle through mute, low, high.

Change Sound Fonts: Hold until the button light flashes twice, then release. Repeat to cycle through the 16 sound options.

Change Music: Hold until the button light flashes 3 times, then release. Repeat to cycle through: music 1, music 2, music 3, and music off. 

Toggle FOC (Flash on Clash): Hold until the button light flashes 4 times, then release.

Toggle Motion Control: Hold until the button light flashes 5 times, then release.

Power Off: Hold until the button light turns off.

Auto Power-Saving: The saber will power off after 10 minutes of inactivity.

Lit Blade Mode

Blade is on.

Blaster Effect: Tap the button.

Lock-up Effect: Hold until the button light flashes once, then release. Tap the button again to deactivate.

Change Blade Colour: Hold until the button light flashes twice, then release. Tap the button to cycle through the 12 colours. To select a colour, hold until the button light flashes once.

Change Blade Effects: Hold until the button light flashes 3 times, then release. Repeat to cycle through the stable, pulsing and flashing effects.

Turn Off Blade: Hold until the button light flashes 4 times, then release (returns to standby mode).

Gesture Operation

Standby Mode

Blade is off, button light is on.

Turn On Blade: Twist the hilt quickly in a fluid motion (clockwise then counterclockwise or vice versa).

Change Sound Fonts: Point the blade upward, hold the button and twist the hilt.

Change Music: Point the blade downward, hold the button and twist the hilt. Repeat to cycle through: music 1, music 2, music 3, music off. 

 

Lit Blade Mode

Blade is on.

Change Blade Effects: Point the blade upward, hold the button and twist the hilt.

Change Blade Colour: Point the blade downward, hold the button and twist the hilt.

FOC (Flash on Clash): Triggered by striking the blade.

Turn Off Blade: Twist the hilt (returns to standby mode).